Kieran's girlfriend's ZX3 made a funny noise shifting from 4th to 5th a week ago and then the clutch would not operate properly - it was not disengaging from the flywheel properly.
After spending most of the day last Sunday pulling it apart, we found this...
One of the two smaller springs had completely failed. The loose part you see was bouncing around inside the clutch casing, the other half you can see has wedged itself inside the left spring.
Never seen this type of failure before.
Simon
_________________
<
http://usukracing.com >
2011 & 2010 Atlantic Rally Cup 2WD Champion
2010 Rally America Eastern Regional 2WD Champion
2009 Atlantic Rally Cup M2 Champion
2008 New York Rally 2WD Championship 2nd Place
2007 Rally Spec Focus Champion