Need some stainless steel plates

MikeWhitney · **Joined:** Wed Aug 20, 2003 9:15 pm **Posts:** 4724

Looking for some stainless steel plate. Needs to be 1/8" thick. I'm flexible on the other dimensions but something around 6x6" would be perfect. Need 8 of these square/rectangular pieces.

I know I can get 2" strip from Dillon steel, but I'm hoping to get creative and think of something that can be repurposed. First thing I thought of was to cut down some cheap stainless circular sawblades but that would be a pain to make them rectangular. And I don't want the hole in the middle.

Any ideas?

DickRasmussen · **Posted:** Fri Jan 25, 2013 8:00 pm

MikeWhitney wrote:

Looking for some stainless steel plate. Needs to be 1/8" thick. I'm flexible on the other dimensions but something around 6x6" would be perfect. Need 8 of these square/rectangular pieces.

I know I can get 2" strip from Dillon steel, but I'm hoping to get creative and think of something that can be repurposed. First thing I thought of was to cut down some cheap stainless circular sawblades but that would be a pain to make them rectangular. And I don't want the hole in the middle.

Any ideas?

Pots/Pans at Goodwill or junk commercial cooking equipment/benches, etc. at scrap metal dealers?

I assume :lol:

you checked McMaster so you are hoping for a less costly alternative.

1/8" thick 6" wide

8992K311 21.47 for one foot long
8992K313 48.64 for 3 feet long
8992K316 82.58 for 6 feet long

http://www.mcmaster.com/#standard-stain ... ts/=l70o9i

THSCC Forums

Need some stainless steel plates

Who is online