LCd projector dies at VIR

Ron Spencer · **Posted:** Tue Apr 05, 2011 8:15 am

Does anyone know if a LCD projector will power up if the bulb has burnt out? Mine dies at VIR and does nothing. I first thought it might have been because of the power failure but the fuses on the ps board are all fine. Thought I'd ask before spending the $$ on a new bulb.

Thanks

Ron

TomFreeman · **Posted:** Tue Apr 05, 2011 8:18 am

Ron Spencer wrote:

Does anyone know if a LCD projector will power up if the bulb has burnt out? Mine dies at VIR and does nothing. I first thought it might have been because of the power failure but the fuses on the ps board are all fine. Thought I'd ask before spending the $$ on a new bulb.

Thanks

Ron

Ron, the ones I've worked with (Dell and InFocus) would power up with a burnt out bulb. You'd hear the fans spin at the very least.

JohnByers · **Posted:** Tue Apr 05, 2011 8:30 am

I have an Epson, and it powered up as well when bulb was burnt. Replaced bulb and all was well.

Chris Halweg · **Posted:** Tue Apr 05, 2011 9:58 am

Ours at work power up and give a red indicator light next to the word 'lamp'.

Erin Dressler · **Joined:** Wed Mar 23, 2011 2:03 pm **Posts:** 36

Same with all the ones I have worked with...

THSCC Forums

LCd projector dies at VIR

Who is online