THSCC Forums

Looking for a local source for AN hardware, Durham/Raleigh area. I need to find a place that has a resonable selection of hardware. Any suggestions???

_________________
2004 C5(415whp,390ft/lbs),
1997C5,1997Trans Am, 1986 C4,
1990 Miata, 1976 MGB,1997 Protege, 1989 MR2

If you cannot find a local source, Pegasus Auto Racing probably has a good supply and, of course, can ship overnight. Their paper catalog is a GREAT way to research AN Stuff. It looks like the online version is good too.

The convenience of determining what you actually need and then being able to order it ("by phone" in 1992) really made my FF project a whole lot easier.

http://www.pegasusautoracing.com/advcat ... D=HARDWARE

_________________
Dick Rasmussen

FS 50 2018 Mustang GT

Cross Hose and Fitting in Raleigh has a lot of compatible stuff (they don't call it AN, but will know what you want). None of it will be pretty anodized aluminum, but it will be 37 degree JIC in brass, stainless, etc.

There were only a couple of places I know that had ANY -AN fittings in stock a couple of years ago- first was Tires N Parts in Downtown Raleigh. They had an OK selection at full retail price.


Might want to also check with Steve Ashworth's in Fuquay, they cater to the roundy-round crowd and I think they have some -AN stuff in stock too.

Thanks for the info,guys, I'm off to do some shopping.

_________________
2004 C5(415whp,390ft/lbs),
1997C5,1997Trans Am, 1986 C4,
1990 Miata, 1976 MGB,1997 Protege, 1989 MR2