ford/mustang forums with classifieds

Matthew_Thomson · **Posted:** Mon Nov 22, 2004 9:07 pm

anyone know of any good ford specifically mustang forums that have classified sections.. i'm looking for some 19# injectors from the 5.0 engine..

Michael Westerfield · **Posted:** Mon Nov 22, 2004 9:46 pm

http://www.corral.net/main.html
http://www.dfwstangs.com
http://forums.stangnet.com
http://www.50tech.com
http://www.mustangworld.com

Matthew_Thomson · **Posted:** Mon Nov 22, 2004 10:08 pm

thanks H.B.

Graham Jagger · **Joined:** Fri Aug 29, 2003 12:53 am **Posts:** 1718

Try these guys. Good source for Bosch injectors. You can get "take outs" from fairly new cars they do swaps on or new ones.

http://www.fiveomotorsport.com/Injector_SetsFORD.asp

Graham

Matthew_Thomson · **Posted:** Tue Nov 23, 2004 9:06 am

yeah.. the bmw recommends them as well.. i'd like to find some for cheaper than that though.. thanks

David Teague · **Posted:** Tue Nov 23, 2004 11:10 am

Michael Westerfield wrote:

http://www.corral.net/main.html
http://www.dfwstangs.com
http://forums.stangnet.com
http://www.50tech.com
http://www.mustangworld.com

Thoose pretty much suck, If you want a good forum with great tech that does not put up with jackknobs, then try www.corner-carvers.net however be sure to read the rules.

Richard Casto · **Posted:** Tue Nov 23, 2004 11:17 am

David Teague wrote:

....If you want a good forum with great tech that does not put up with jackknobs, then try www.corner-carvers.net however be sure to read the rules.

That link doesn't work. Did you really mean...

http://corner-carvers.com/

Matthew_Thomson · **Posted:** Tue Nov 23, 2004 12:22 pm

David Teague wrote:

Michael Westerfield wrote:

http://www.corral.net/main.html
http://www.dfwstangs.com
http://forums.stangnet.com
http://www.50tech.com
http://www.mustangworld.com

Thoose pretty much suck, If you want a good forum with great tech that does not put up with jackknobs, then try www.corner-carvers.net however be sure to read the rules.

thanks.. but "ford" and "great tech" dont go together in my vocabulary :lol:

.. like i said i'm just looking for injectors to buy

Todd Breakey · **Posted:** Thu Nov 25, 2004 12:21 am

CORRAL.NET No 19 lb injectors but several 24 lbs

http://www2.corral.net/classifieds/show ... 18&ppuser=

STANGNET.COM Again, no 19 lb but here's a link to a guy selling 24 lb

http://classifieds.stangnet.com/showpro ... all&page=1

DFWSTANGS.COM There are several people selling injectors but their site doesn't give me a good link for you. Go to the forums and then to the "Wanted/For Sale/Trade" section for a listing.

Arthur McDonald · **Joined:** Fri Aug 29, 2003 1:54 am **Posts:** 2052

19 lb injectors are the stock items for 5.0 Mustangs, so naturally the aftermarket ones are usually 24 lb or higher, because more is always more. Here are a couple of leads:

Locally - http://www.UnbridledPonies.com/contact.htm A fellow named John Hornyak who used to autocross with us is or was involved with this company.

Down in Georgia: http://www.stangparts.com/ they list sets of 8 take-out injectors for $75. But if you really want to go faster -- rebuilt 94/95 302 long blocks for $1250. You've got the WHOLE winter to make it fit

Matthew_Thomson · **Posted:** Wed Dec 01, 2004 11:43 pm

thanks for the help everyone.. just FYI the 19lb injectors are what i need because the mustang injectors are and upgrade for my BMW.. i dont have a mustang so that wasnt my purpose.. i ended up getting a set off ebay for like $35 and i mailed them out today to cruzin performance to be cleaned and flow tested..

THSCC Forums

ford/mustang forums with classifieds

Who is online