Want to Borrow: 5 or 10mm spacers in 5x114.3

Andrew Jonell · **Joined:** Mon Mar 23, 2009 6:43 pm **Posts:** 1350

If anybody has a wheel spacer (or two) to lend, that would be awesome. I'm trying to figure out some wheel fitment issues without dropping a bunch of money on either wheels or wheel spacers. Can return the spacers with a 6 pack.

MikeWhitney · **Joined:** Wed Aug 20, 2003 9:15 pm **Posts:** 4724

Andrew I am pretty sure I have a couple of the generic 5mm spacers here ... let me double check and let you know.

RodneyWright · **Posted:** Wed Nov 05, 2014 8:19 pm

I have a set of 3mm off of the mustang and I have a set of 4mm on the car. I can run the street fronts w/ out them, but I have to have them for the autox wheels. If you can get them back to me before the autox, you're welcome to borrow them...

Jason Mauldin · **Posted:** Thu Nov 06, 2014 12:42 am

Just as an FYI. Autozone has a selection of spacers that are around this thickness. 1/4 or 5/16" iirc. They were $10-20 the last time that I looked at them.

edit: if you are just testing wheel placement, a stack of washers would be really handy to get the wheel exactly where you need it.

MikeWhitney · **Joined:** Wed Aug 20, 2003 9:15 pm **Posts:** 4724

Have two 5mm with 5-lug holes, and three 8mm with 4-lug holes (that might still work on 5-lug). You're welcome to use them for as long as you want, just return them someday.

THSCC Forums

Want to Borrow: 5 or 10mm spacers in 5x114.3

Who is online