Charlie Smith wrote:
Would those A3SO4's need to be heat cycled and/or shaved? If so, how much would that be and who can do that?
Another question about Hoosiers: Are they wider than the "advertised" size? The guy that I bought my car from had used a set of R3SO4's, and they were wider than most 205/50's. In fact, they rubbed a place in my rear trailing arms.
They need heaqt cycled...you can do that yourself a number of ways. You must get more than 2 degress of negative camber up front. The 04's will cors the outer edge. After 25 runs, flip them on the rims. I was getting nearly 75 runs out the tire. But I do have -2.8 degree camber up front and did flip the fronts.
They were okay tires. A longer life than the S03's but were not as crisp. They felt more like the Victoracers.
_________________
Jim Pastorius
2008 Silverado VortecMax
1992 Camaro
CMC#92
2002 BMW R1150R
2009 3rd Place CMC Mid-Atlantic Championship
2009 CMC Hyperfest Winner