Brian Herring wrote:
Patrick Wellenius wrote:
After Danville, Chris and I swapped cars. He beat his own fastest time in my car...TWICE. That was the first time he'd ever driven a Corrado. Humbling if you ask me. Funny thing was that driving his car I turned in my 2nd and 3rd fastest times of the day. Overdriving? Just bad habits I didn't carry over? Might also be that I was paying more attention to what the car was doing whereas I take some things for granted in the Corrado?Who knows, but I'm gonna try to "take it down a notch" and try to relax a little more during my runs.
Amen to that sentiment. Nothing really to add here other than I experienced the same thing at 'The Rock', and I noticed I DROPPED time when I was at full attack, but not overly aggressive and I was patient.
However, I am a n00b and a pale comparison to you gentlemen.
Seems like I will be equalling your 3rd in class now.. but in STX

.
- dow
I had a bit of an epiphany at Rockingham as well. We're all used to airport sites which can lend themselves to "balls" sections where you need to be able to pitch a car through a tight segment in order to be able to be full throttle ASAP. That approach only worked in one corner at Rockingham - as I found out after a few runs.
Instead, I screwed into my head the attitude, "Get the HECK out of the corner". I concentrated VERY hard on spending as little time in most corners - tight line in, no understeer, and accelerate out as efficiently as possible. Turned out that was the ticket for all of those corners without an appreciable straight after.
I have been to autocross schools in the past where people weighed the pros and cons of the "roadrace" line of wide entry, fast exit, versus the "shorter distance" line. One rule of thumb that is often discussed is the angle of the corner - more than 90, do a tight line, less than 90 do a late apex line.
Now I know that the inflection point is actually in the length of the straight after it, not the angle of the corner. Note that by straight I mean whether the section after the corner can be taken at full throttle - not the same thing as a "straight".
Sorry for rambling. Thought I would share

_________________
Mike Whitney
whit32@gmail.com, 919-454-5445
V10, V8, V8t, I6, I6, V6, F4t, I4, I4, I4, I4, I2, 1, 1